ecm surface mount oscillator ecm electronics limited, penmaen house, ashington, west sussex, rh20 3jr, uk tel: +44(0 )1903 892810: fax: +44(0)1903 892738. email: ecm@ecmelectronics.co.uk although we have attempted to accurately reflect the products we market. ecm reserve the right without prior notice to discontinue any product or make design changes we believe necessary. issue 1 epson sg615 series environmental & mechanical mechanical shock eiaj ed-4701 a-124 thermal shock eiaj ed-4701-b-131 vibration eiaj ed-4701 a-121 soldering condition 260 0 c for 10 seconds max 230 0 c within 3 minutes pin 1 2 3 4 function tristate gnd / case o/p v dd a b c d e f 14.00 8.65 4.31 9.80 7.62 5.08 g h j k l 0.51 3.00 5.80 1.30 3.80 dimensions in mm parameter sg615p sg615ptj sg615ph frequency range 1.025mhz to26.0mhz 26.0001 to 66.6667mhz frequency stability b type +/-50ppm c type +/-100ppm supply voltage 5.0v +/-10% supply current 23ma max 35ma max load (cmos) (ttl) 50pf max 10ttl max _ 5ttl max 50pf max _ duty cycle (cmos) (ttl) 40 / 60 45 / 55 - 45 / 55 40 / 60 - ouput rise (cmos) times (ttl) 8ns max 8ns max - 5ns max 7ns max - output fall (cmos) times (ttl) 8ns max 8ns max - 2ns max 7ns max - output enable voh disable voltage vol 2.0v min 0.8v min 3.5v min 1.5v max 2.0v min 0.8v max start-up time 4ms max 10ms max aging +/-5ppm / year max operating temp -10 0 c to +70 0 c -40 0 c to +85 0 c available smd oscillator with heat resisting crystal output enable low current consumption superior shock resistance high density mounting smd oscillator part numbering : sg615p 6.0m b a type frequency tolerance b = 50ppm c = 100ppm temperature range blank = standard a= -40 0 c to +85 0 c
|
